Stainless Steel Belts For Chocolate Coater
Flat flex belt is usually made of high elastic stainless steel wire and driven by stainless steel sprockets or nylon sprockets. The widths vary from 150mm to 6000mm. Special widths can be customized according to specific requirements. Single loop Edge(SLE) or double loops edge(DLE) structure, suitable for straight running or turn curve conveyors, followings are its main advantages -
(1) Sprokets positive drive ensures stable tracking
(2) Large opening area, good ventilation, air through and water through
(3) Small drive rolls diameter
(4) Easy to clean, more hygienic
Product Specifications:
| Material |
SUS304 / 316 / 310 |
| Width |
15 - 6000mm |
| Longitudinal Pitch |
4 - 20 mm or customized |
| Wire Diameter |
1.0 / 1.2 / 1.4 / 1.5 / 1.6 / 1.8 / 2.0 / 2.5 / 3.0 mm |
| Egde |
Single Loop / Double Loops |
| Typical Applications |
Food Industry, Electronics, PCB, Dyeing, Plastic Industry |
Product Details:
Applications:
With single layer structure and light weight, it is suitable for many processes in which the product should have as little contact with the conveyor belt as possible, such as:
Food industry: often used in light weight products processing - frying, freezing, heating, cooling, cooking, drying, baking, coating, enrobing and sterilization for desserts, pizza, vegetables, bread, flour cakes, meat, fish, candy, potatoes, biscuits, chocolate, nuts, fruit, etc. Like chocolate enrobing, battering and breading, freezing for seafood processing, frying chickens, cooling wafer after coating, pizza baking.
Electronics industry: printed circuit board required minimum contact support, melting, sold or drying welding.
Caps making industry: drying for drop plastic
Others, like textiles, glass heat treatment, printing and dyeing, radio, scientific research applications.
Product Pictures:
Product Packing:
How to maintain:
The environment where the flat flex belt used is very important. It can be summarized as: dry, clean, lubricated, and related equipment runs well.
The belt should be stored in a dry environment to avoid moisture. Keep the mesh clean, no impurity in the inlet and outlet. Regularly remove dust from the net. Bearings should be lubricated regularly. During storage and handling, the flat flex belt should be prevented from bumping to avoid damaging the belt.
In addition, we must check the equipment that drives the band. In the course of operation, if the motor is seriously heated, the shell is charged, the switch trips, or can not start, and other phenomena, we should stop immediately to check the motor. After maintenance, the test runs for about 5 minutes, confirming that there is no abnormal phenomenon and then we can run it again. At the same time, ensure the voltage stability of power supply facilities is stable and prohibit the operation of lack of phase, power supply lines must be dedicated lines, not long-term use of temporary line power supply.
Good use environment and regular maintenance habits can reduce the maintenance of flat flex belt and its equipment, prolong service life, increase product throughput.
Company View:
Founded in 2001, Shandong Kenside Machinery Manufacturing Co., Ltd. is located at town of metal conveyor belt - Shandong, China. With workshop covers an area of more than 16,000 square meters, it specialise in R&D, design, production and sale of all kinds conveyor belts and chains. There are more than 10 engineers and 120 employees and workers at our factory now.
Our main products are as followings: Chain driven belts, chain plate belts, roller conveyor, spiral belts, flat wire belts, flat flex belts, eye link belts, sprockets, etc. We can also design, produce and OEM all kinds of conveyors according to your requirements.
"Good Quality, Best Service" is our principle, welcome friends from all over the world to visit and enquiry.
Contacts:
Audited Supplier 
){kind=link}
){kind=link}